×

重组小鼠Fms相关酪氨酸激酶3配体,His-标签(无动物源)(Flt-3 Ligand)

Mouse Flt-3 Ligand protein, His tag (Animal-Free)

产品货号
PRP1149

产品特点:

  • 高纯度:SDS-PAGE检测纯度>98%,确保实验可靠性
  • 高生物活性:ED50<2 ng/mL,通过诱导转染小鼠Flt-3的BaF3细胞增殖验证
  • 低内毒素水平:采用LAL法检测,每1μg蛋白质中EU含量<0.1,减少干扰
  • 无动物源表达:在大肠杆菌宿主中生产,避免动物源性污染风险
  • 便捷纯化:C-端6×His标签设计,简化亲和纯化流程
  • 选择规格

    5 μg
    ¥588
    现货(次日发货)
    20 μg
    ¥1498
    现货(次日发货)
    100 μg
    ¥3998
    请咨询
    1 mg
    ¥请咨询
    请咨询
    🎉 限时优惠

    买2送1活动进行中!购买任意2个规格产品,免费赠送100μL装一支。

    活动截止时间:2024年1月31日

    产品概述

    PRP1149是一种重组小鼠Fms相关酪氨酸激酶3配体(Flt-3 Ligand)蛋白,带有C-端6×His标签,无动物源表达,在大肠杆菌宿主中生产,通过冻干形式提供,适用于细胞培养等研究应用。

    Fms相关酪氨酸激酶-3配体(Flt-3 Ligand)是一种由小鼠Flt3lg基因编码的关键细胞因子,蛋白质ID为P49772。作为造血系统的重要调节因子,Flt-3配体具有酪氨酸蛋白激酶活性,能特异性刺激淋巴和骨髓来源的造血祖细胞增殖。它在未成熟祖细胞的扩增中发挥核心作用,可与其他细胞因子(如GM-CSF、G-CSF、IL-3、EPO、IL-11、IL-12、IL-6或TPO)协同增强效应。Flt-3配体主要由未成熟造血细胞和骨髓基质细胞表达,是研究造血发育、免疫调节和干细胞生物学的重要工具。

    应用领域: 本品专为细胞类研究设计,主要应用于细胞培养体系,特别适用于造血祖细胞增殖研究、免疫学实验、干细胞分化分析及细胞因子协同效应评估等领域。

    重组小鼠Fms相关酪氨酸激酶3配体,His-标签(无动物源)(Flt-3 Ligand)

    产品参数

    中文名称 重组小鼠Fms相关酪氨酸激酶3配体,His-标签(无动物源)(Flt-3 Ligand)
    英文名称 Mouse Flt-3 Ligand protein, His tag (Animal-Free)
    产品货号 PRP1149
    序列 氨基酸序列来源于小鼠源:Flt-3 配体(Gly27-Arg188)(P49772)表达的蛋白片段,C-端带有 6×His 标记。
    标签 His
    种属 小鼠
    活性 通过其诱导转染有小鼠Flt-3的BaF3细胞增殖的能力来衡量。这种效应的ED50<2 ng/mL。
    蛋白长度 该蛋白质的计算分子量为 19.3 kDa,在还原条件下,蛋白质迁移为 19 kDa(SDS-PAGE 分析)。
    表达宿主 大肠杆菌
    纯度 > 98 % ,使用SDS-PAGE检测
    产品形式 该蛋白质是由 0.2 µm 过滤溶液冻干而成,含 1X PBS,pH 7.4。如有任何疑问或特殊要求,请与我们联系。
    分子量 19.3 kDa
    蛋白质ID P49772
    蛋白序列链接 http://www.uniprot.org/uniprot/P49772
    分子 Flt-3 Ligand
    注意事项 打开前以 3000 rpm 离心 5 分钟。建议用配套无菌ddH2O复溶冻干蛋白,使其浓度不低于 100 μg/mL ,并将储备液在室温下孵育至少 20 分钟,以确保充分再溶解。切勿振荡!剧烈振荡可能会影响蛋白质的生物活性。
    保存建议 冻干蛋白应在 -20°C 下保存 1 年。重组后,在 2°C 至 8°C 下最多可保存 1 周。 在含有载体蛋白或稳定剂的缓冲液中进一步稀释(如 0.1%BSA、10%FBS、5%HSA)中进一步稀释,蛋白等分应在 -20°C 或 -80°C 下保存 3-6 个月。避免反复冻融循环。
    运输条件 冰袋运输(蓝冰)
    警告 本文列出的产品仅供研究使用,不适用于人类或临床诊断。我们产品所推荐应用,不是建议使用我们的产品去违反任何专利或许可证。对于使用本产品可能发生的专利侵权或其他违规行为,我们不承担任何责任。

    使用说明

    Sequence

    Amino acid sequence derived from Mouse Flt-3 Ligand (Gly27-Arg188)(P49772) with 6×His tag at the C-terminus was expressed.

    Protein length

    The secreted Mouse Flt-3 Ligand consists of 162 amino acids and has a predicted molecular mass of 19.3 kDa.

    Protein length

    The secreted Mouse Flt-3 Ligand consists of 162 amino acids and has a predicted molecular mass of 19.3 kDa.

    Biological Activity

    Measure by its ability to induce proliferation in BaF3 cells transfected with Mouse Flt-3 Ligand. The ED50 for this effect is <2 ng/mL.

    Biological Activity

    Measure by its ability to induce proliferation in BaF3 cells transfected with Mouse Flt-3 Ligand. The ED50 for this effect is <2 ng/mL.

    Endotoxin

    < 0.1 EU per μg of the protein as determined by the LAL method.

    Endotoxin

    < 0.1 EU per μg of the protein as determined by the LAL method.

    Formulation

    Lyophilized from sterile PBS, pH 7.4.

    Formulation

    Lyophilized from sterile PBS, pH 7.4.

    Storage Instructions

    Lyophilized protein product should be stored desiccated below -18°C. Upon reconstitution, the protein should be stored at 4°C between 2-7 days and for future use below -18°C. For long term storage it is recommended to add a carrier protein (5% HSA, 10%FBS or 0.1%BSA). Please prevent freeze-thaw cycles.

    Storage Instructions

    Lyophilized protein product should be stored desiccated below -18°C. Upon reconstitution, the protein should be stored at 4°C between 2-7 days and for future use below -18°C. For long term storage it is recommended to add a carrier protein (5% HSA, 10%FBS or 0.1%BSA). Please prevent freeze-thaw cycles.

    Usage notes

    Always centrifuge tubes before opening. It is recommended to reconstitute the lyophilized Mouse Flt-3 Ligand protein to a concentration of 0.1-1 mg/mL in sterile ddH2O, and keep at room temperature for at least 20 min to fully dissolve. Please avoid vortex vigorously.

    Usage notes

    Always centrifuge tubes before opening. It is recommended to reconstitute the lyophilized Mouse Flt-3 Ligand protein to a concentration of 0.1-1 mg/mL in sterile ddH2O, and keep at room temperature for at least 20 min to fully dissolve. Please avoid vortex vigorously.

    Fig. SDS-PAGE analysis of Mouse Flt-3 Ligand protein.
    Note: The product listed herein is for research use only and is not intended for use in human or clinical diagnosis. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license. We cannot be responsible for patent infringements or other violations that may occur with the use of this product.
    Note:

    常见问题

    暂无相关常见问题。如有疑问,请联系我们的技术支持团队。

    文献引用

    请等待最新文献信息更新。

    相关资讯

    专业技术支持

    我们的技术团队为您提供全方位的产品支持服务

    实验方案设计

    根据您的研究目标,提供个性化的实验设计方案

    问题排查

    经验丰富的技术专家协助您解决实验中遇到的问题

    在线技术咨询

    7x24小时在线技术支持,随时为您答疑解惑

    免费样品申请

    提供免费样品试用,让您先试后买更放心

    400电话
    在线咨询
    技术支持
    公众号
    公众号
    返回顶部