×

重组人酸性成纤维细胞生长因子,His-标签(无动物源)(FGF-1/aFGF)

Human FGF1/aFGF Protein, His tag (Animal-Free)

产品货号
PRP1008

产品特点:

  • 高纯度:>98%,经SDS-PAGE严格检测,确保批次一致性。
  • 高生物活性:ED50 <0.3 ng/mL(基于3T3细胞增殖实验),比活性 >1 × 106 IU/mg。
  • 低内毒素:每微克蛋白内毒素含量<0.1 EU,通过LAL法验证,减少实验干扰。
  • 无动物源成分:表达和纯化全程避免动物源性材料,降低免疫原性风险。
  • 便捷储存形式:冻干粉制剂,缓冲液为无菌PBS(pH 8.0),易于复溶和长期保存。
  • 选择规格

    5 μg
    ¥588
    现货(次日发货)
    20 μg
    ¥1498
    现货(次日发货)
    100 μg
    ¥3369
    请咨询
    1 mg
    ¥请咨询
    请咨询
    🎉 限时优惠

    买2送1活动进行中!购买任意2个规格产品,免费赠送100μL装一支。

    活动截止时间:2024年1月31日

    产品概述

    重组人酸性成纤维细胞生长因子(Human FGF1/aFGF Protein, His tag, Animal-Free)是一种基于大肠杆菌表达系统生产的重组蛋白产品,带His标签且无动物源成分,专为细胞培养和生物医学研究设计,用于高效促进细胞增殖和血管生成实验。

    成纤维细胞生长因子-1(FGF-1)是一种关键的有丝分裂肽生长因子,分子量约15 kDa,由巨噬细胞分泌,通过结合细胞膜上的FGFR受体并触发内吞作用,诱导内皮细胞增殖、血管生成和组织重塑过程,在伤口愈合和组织修复中发挥核心作用。本产品(货号:PRP1008)序列源自人源FGF1(Phe 16-Asp 155,蛋白质ID:P05230),通过重组技术精确表达,确保高特异性和可靠性,适用于细胞功能研究和信号通路分析。

    本产品主要应用于细胞类研究领域,尤其聚焦于细胞培养中的增殖实验、血管生成模型、伤口愈合机制研究,以及生物医学基础科学和药物开发中的功能验证。

    重组人酸性成纤维细胞生长因子,His-标签(无动物源)(FGF-1/aFGF)

    产品参数

    中文名称 重组人酸性成纤维细胞生长因子,His-标签(无动物源)(FGF-1/aFGF)
    英文名称 Human FGF1/aFGF Protein, His tag (Animal-Free)
    产品货号 PRP1008
    序列 氨基酸序列来源于:人源FGF1 (Phe 16-Asp 155) (P05230-1)
    标签 His
    种属
    活性 Measure by its ability to induce 3T3 cells proliferation.The ED₅₀ for this effect is <0.3 ng/mL.The specific activity of recombinant human FGF-1 is > 1 x 10⁶ IU/mg.
    蛋白长度 重组人FGF1/aFGF 蛋白由140个氨基酸组成,预测分子量为16.77 KD。
    表达宿主 大肠杆菌
    纯度 > 98 % ,使用SDS-PAGE检测
    产品形式 冻干粉,冻干缓冲液为无菌的PBS,pH 8.0。
    分子量 16.77 kDa
    基因ID 2246
    蛋白质ID P05230
    蛋白序列链接 https://www.uniprot.org/uniprotkb/P05230/entry
    分子 FGF-1
    检测指标 FGF-1
    注意事项 开盖使用前,请先离心。本产品为冻干粉,推荐用该产品配套的Reconstitution Buffer进行复溶,且浓度不低于100 µg/mL。客户可根据后续的实验需求,进行进一步的稀释。
    保存建议 冻干蛋白应在 -20°C 下保存 1 年。复溶后,在 2°C 至 8°C 下最多可保存 1 周。 在含有载体蛋白或稳定剂的缓冲液(如 0.1% BSA、10%FBS、5%HSA 或 5% 海藻糖溶液)中进一步稀释后,分装的蛋白质应在 -20°C 或 -80°C 下保存 3-6个月。避免反复冻融循环。
    运输条件 冰袋运输(蓝冰)
    警告 本文列出的产品仅供研究使用,不适用于人类或临床诊断。我们产品所推荐应用,不是建议使用我们的产品去违反任何专利或许可证。对于使用本产品可能发生的专利侵权或其他违规行为,我们不承担任何责任。

    使用说明

    Sequence

    Amino acid sequence derived from Human FGF1 (Phe 16-Asp 155) (P05230-1) was expressed with 6×His tag at the C-terminus.

    Protein length

    The recombinant Human FGF1 consists of 140 amino acids and predicts a molecular mass of 16.77 kDa.

    Biological Activity

    Measured by its ability to induce 3T3 cells proliferation. The ED50 for this effect is <0.3 ng/mL.

    Endotoxin

    <0.1 EU per 1 μg of the protein by the LAL method.

    Formulation

    Lyophilized from sterile PBS, pH 8.0.

    Storage Instructions

    Lyophilized protein product should be stored desiccated below -18°C. Upon reconstitution, the protein should be stored at 4°C between 2-7 days and for future use below -18°C. For long term storage it is recommended to add a carrier protein (5% HSA , 10%FBS, 0.1%BSA or 5% trehalose solution). Please prevent freeze-thaw cycles.

    Usage notes

    Always centrifuge tubes before opening. It is recommended to reconstitute the lyophilized recombinant protein to a concentration of 0.1-1 mg/mL using sterile H2O, and keep at room temperature for at least 20 min to fully dissolve. Please avoid vortex vigorously.

    Fig. SDS-PAGE analysis of Human FGF1/aFGF Protein.

    Note: The product listed herein is for research use only and is not intended for use in human or clinical diagnosis. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license. We cannot be responsible for patent infringements or other violations that may occur with the use of this product.

    Note: The product listed herein is for research use only and is not intended for use in human or clinical diagnosis. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license. We cannot be responsible for patent infringements or other violations that may occur with the use of this product.

    Note:

    常见问题

    暂无相关常见问题。如有疑问,请联系我们的技术支持团队。

    文献引用

    请等待最新文献信息更新。

    相关资讯

    专业技术支持

    我们的技术团队为您提供全方位的产品支持服务

    实验方案设计

    根据您的研究目标,提供个性化的实验设计方案

    问题排查

    经验丰富的技术专家协助您解决实验中遇到的问题

    在线技术咨询

    7x24小时在线技术支持,随时为您答疑解惑

    免费样品申请

    提供免费样品试用,让您先试后买更放心

    400电话
    在线咨询
    技术支持
    公众号
    公众号
    返回顶部