×

重组人骨形态发生蛋白4,His-标签(无动物源)(BMP-4)

Human BMP-4 protein, His tag (Animal-Free)

产品货号
PRP1064

产品特点:

  • 高纯度:纯度 >95%,经SDS-PAGE严格检测,确保实验结果可靠性
  • 高生物活性:ED50 < 0.58 ng/mL,以诱导ATDC5细胞碱性磷酸酶产生能力验证
  • 低内毒素:每1μg蛋白质中EU含量 < 0.1(LAL法检测),降低细胞毒性风险
  • 无动物源设计:表达和纯化全程无动物成分,适用于敏感细胞培养应用
  • 精确分子特性:计算分子量12.88 kDa,在还原SDS-PAGE中迁移为12 kDa
  • 选择规格

    5 μg
    ¥588
    现货(次日发货)
    20 μg
    ¥1498
    现货(次日发货)
    100 μg
    ¥3998
    请咨询
    1 mg
    ¥请咨询
    请咨询
    🎉 限时优惠

    买2送1活动进行中!购买任意2个规格产品,免费赠送100μL装一支。

    活动截止时间:2024年1月31日

    产品概述

    PRP1064 Human BMP-4 protein, His tag (Animal-Free)是一种重组人骨形态发生蛋白4,在大肠杆菌中表达,带有N端6×His标签,无动物源成分,适用于细胞培养等应用。该蛋白基于人源BMP-4(Met302-Arg408)序列,通过严格纯化工艺制备,为细胞因子研究提供高纯度试剂。

    骨形态发生蛋白-4(BMP-4)是一种多功能细胞外信号分子,属于TGF-β超家族成员,在细胞信号转导中发挥核心作用。它通过与TGF-β受体结合,激活SMAD蛋白通路,调控细胞增殖、分化和凋亡过程。BMP-4在前列腺中高表达,并在胚胎发育中参与骨骼形成、表皮分化和背腹轴模式化等关键生物学事件,使其成为研究组织再生和发育机制的重要工具。本产品采用动物源无添加工艺,确保在细胞实验中减少干扰风险。

    该产品主要应用于细胞生物学研究领域,包括细胞培养中的信号通路分析、发育机制探索、骨骼形成实验及组织再生模型构建。特别适用于干细胞分化、骨代谢研究和前列腺相关疾病模型等高精度实验场景。

    重组人骨形态发生蛋白4,His-标签(无动物源)(BMP-4)

    产品参数

    中文名称 重组人骨形态发生蛋白4,His-标签(无动物源)(BMP-4)
    英文名称 Human BMP-4 protein, His tag (Animal-Free)
    产品货号 PRP1064
    序列 氨基酸序列来源于人源:BMP-4(Met302-Arg408)(P12644)表达的蛋白片段,在 N 端用 6×His 标签表达。
    标签 His
    种属
    活性 以其诱导 ATDC5 细胞产生碱性磷酸酶的能力来衡量。该效应的ED50<<0.58 ng/mL"。
    蛋白长度 该蛋白质的计算分子量为 12.88 kDa,在还原条件下,蛋白质迁移为 12 kDa(SDS-PAGE 分析)。
    表达宿主 大肠杆菌
    纯度 > 95 % ,使用SDS-PAGE检测
    产品形式 该蛋白质是从含有 20 mM 碳酸钠(pH 值为 9.0)的 0.2 µm 过滤溶液中冻干的。如有任何疑问或特殊要求,请与我们联系。
    分子量 12.88 kDa
    蛋白质ID P12644
    蛋白序列链接 http://www.uniprot.org/uniprot/P12644
    分子 BMP-4
    检测指标 BMP-4
    注意事项 打开前以 3000 rpm 离心 5 分钟。建议用配套无菌ddH2O复溶冻干蛋白,使其浓度不低于 100 μg/mL ,并将储备液在室温下孵育至少 20 分钟,以确保充分再溶解。切勿振荡!剧烈振荡可能会影响蛋白质的生物活性。
    保存建议 冻干蛋白应在 -20°C 下保存 1 年。重组后,在 2°C 至 8°C 下最多可保存 1 周。 在含有载体蛋白或稳定剂的缓冲液中进一步稀释(如 0.1%BSA、10%FBS、5%HSA)中进一步稀释,蛋白等分应在 -20°C 或 -80°C 下保存 3-6 个月。避免反复冻融循环。
    运输条件 冰袋运输(蓝冰)
    警告 本文列出的产品仅供研究使用,不适用于人类或临床诊断。我们产品所推荐应用,不是建议使用我们的产品去违反任何专利或许可证。对于使用本产品可能发生的专利侵权或其他违规行为,我们不承担任何责任。

    使用说明

    Sequence

    Amino acid sequence derived from Human BMP-4 (Met302-Arg408)(P12644) was expressed with 6×His tag at the C-terminus.

    Protein length

    The recombinant Human BMP-4 consists of 107 amino acids and predicts a molecular mass of 12.1 kDa.

    Biological Activity

    Measure by its ability to induce alkaline phosphatase production by ATDC5 cells. The ED50 for this effect is <0.58 ng/mL.

    Endotoxin

    < 0.1 EU per μg of the protein as determined by the LAL method.

    Formulation

    The protein was lyophilized from a 0.2 µm filtered solution containing 20 mM sodium carbonate, pH 9.0.

    Storage Instructions

    Lyophilized protein product should be stored desiccated below -18°C. Upon reconstitution, the protein should be stored at 4°C between 2-7 days and for future use below -18°C. For long term storage it is recommended to add a carrier protein (5% HSA, 10%FBS or 0.1%BSA). Please prevent freeze-thaw cycles.

    Usage notes

    Always centrifuge tubes before opening. It is recommended to reconstitute the lyophilized recombinant human BMP-4 protein to a concentration of 0.1-1 mg/mL in sterile ddH O, and keep at room temperature for at least 20 min to fully dissolve. Please avoid vortex vigorously.

    Fig. SDS-PAGE analysis of Human BMP-4 protein.

    Note: The product listed herein is for research use only and is not intended for use in human or clinical diagnosis. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license. We cannot be responsible for patent infringements or other violations that may occur with the use of this product.

    Note: The product listed herein is for research use only and is not intended for use in human or clinical diagnosis. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license. We cannot be responsible for patent infringements or other violations that may occur with the use of this product.

    Note:

    常见问题

    暂无相关常见问题。如有疑问,请联系我们的技术支持团队。

    文献引用

    请等待最新文献信息更新。

    相关资讯

    专业技术支持

    我们的技术团队为您提供全方位的产品支持服务

    实验方案设计

    根据您的研究目标,提供个性化的实验设计方案

    问题排查

    经验丰富的技术专家协助您解决实验中遇到的问题

    在线技术咨询

    7x24小时在线技术支持,随时为您答疑解惑

    免费样品申请

    提供免费样品试用,让您先试后买更放心

    400电话
    在线咨询
    技术支持
    公众号
    公众号
    返回顶部