分享产品
重组人骨形态发生蛋白13(BMP-13)
Human BMP-13 Protein
产品特点:
选择规格
买2送1活动进行中!购买任意2个规格产品,免费赠送100μL装一支。
活动截止时间:2024年1月31日
买2送1活动进行中!购买任意2个规格产品,免费赠送100μL装一支。
活动截止时间:2024年1月31日
重组人骨形态发生蛋白13 (Human BMP-13 Protein) (货号: PRP1043) 是一种基于大肠杆菌表达系统生产的重组细胞因子,通过高效表达人源BMP-13的特定片段(Thr335-Arg454),用于细胞培养等研究中调节细胞凋亡和相关生物过程。该蛋白以冻干粉形式提供,复溶后可直接应用于细胞实验。
骨形态发生蛋白13 (BMP-13),又称生长分化因子,属于转化生长因子β (TGF-β) 超家族成员。它以无活性的前蛋白形式产生,经裂解后组装成有活性的分泌型同源二聚体。在生物学功能上,BMP-13在视网膜发育过程中发挥核心作用,调节细胞凋亡和分化过程。本产品提供高纯度的重组人BMP-13蛋白,适用于细胞因子相关研究,为细胞培养实验提供可靠试剂。
本产品主要应用于细胞培养领域,特别适用于细胞凋亡研究、细胞分化实验、发育生物学及视网膜相关功能分析。作为核心细胞因子产品,它在细胞因子信号通路、生物医学研究和基础细胞实验中具有广泛用途。
| 中文名称 | 重组人骨形态发生蛋白13(BMP-13) |
| 英文名称 | Human BMP-13 Protein |
| 产品货号 | PRP1043 |
| 序列 | 氨基酸序列来源于:人源 BMP-13 (NP_001001557.1) (Thr335-Arg454)表达的蛋白片段。 |
| 标签 | 无标签 |
| 种属 | 人 |
| 蛋白长度 | 重组人 BMP-13 由120个氨基酸组成,预测分子质量为 13.5 kDa。 |
| 表达宿主 | 大肠杆菌 |
| 纯度 | > 96 % ,使用SDS-PAGE检测 |
| 产品形式 | 冻干粉,冻干缓冲液为无菌的 50mM NaCl 20mM Tris , pH 7.0溶液。 |
| 分子量 | 13.5 kDa |
| 基因ID | 392255 |
| 蛋白质ID | P49278 |
| 蛋白序列链接 | http://www.uniprot.org/uniprot/P49278 |
| 分子 | BMP-13 |
| 检测指标 | BMP-13 |
| 注意事项 | 开盖使用前,请先离心。本产品为冻干粉,推荐用该产品配套的Reconstitution Buffer进行复溶,且浓度不低于100 µg/mL。客户可根据后续的实验需求,进行进一步的稀释。 |
| 保存建议 | 本产品为冻干粉形式,建议:将冻干粉的重组人骨形态发生蛋白13产品保存于-20℃以下的干燥环境中。本产品溶解之后,可在4℃保存2-7天,长期使用请置于-20℃以下。为长期保存,推荐添加载体蛋白(0.1% HSA或者BSA),并酌情分装保存,避免反复冻融。 |
| 运输条件 | 常温运输 |
| 警告 | 本文列出的产品仅供研究使用,不适用于人类或临床诊断。我们产品所推荐应用,不是建议使用我们的产品去违反任何专利或许可证。对于使用本产品可能发生的专利侵权或其他违规行为,我们不承担任何责任。 |
Amino acid sequence derived from Human BMP-13 (NP_001001557.1) (Thr335-Arg454) was expressed.
The recombinant Human BMP-13 consists of 120 amino acids and predicts a molecular mass of 13.5 kDa.
The recombinant Human BMP-13 consists of 120 amino acids and predicts a molecular mass of 13.5 kDa.
Testing in progress.
Testing in progress.
< 1 EU per μg of the protein as determined by the LAL method.
< 1 EU per μg of the protein as determined by the LAL method.
Lyophilized from sterile 20mM Tris, 50mM NaCl, pH 7.0.
Lyophilized from sterile 20mM Tris, 50mM NaCl, pH 7.0.
Lyophilized recombinant Human BMP-13 protein product should be stored desiccated below -20°C. Upon reconstitution, the protein should be stored at 4°C between 2-7 days and for future use below -20°C. For long term storage it is recommended to add a carrier protein (0.1% HSA or BSA). Please prevent freeze-thaw cycles.
Lyophilized recombinant Human BMP-13 protein product should be stored desiccated below -20°C. Upon reconstitution, the protein should be stored at 4°C between 2-7 days and for future use below -20°C. For long term storage it is recommended to add a carrier protein (0.1% HSA or BSA). Please prevent freeze-thaw cycles.
Always centrifuge tubes before opening. It is recommended to reconstitute the lyophilized recombinant Human BMP-13 protein using the buffer we provided not less than 100µg/ml, which can then be further diluted to other aqueous solutions.
Always centrifuge tubes before opening. It is recommended to reconstitute the lyophilized recombinant Human BMP-13 protein using the buffer we provided not less than 100µg/ml, which can then be further diluted to other aqueous solutions.
Fig. SDS-PAGE analysis of Human BMP-13 protein.
Fig. SDS-PAGE analysis of Human BMP-13 protein.
Note: The product listed herein is for research use only and is not intended for use in human or clinical diagnosis. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license. We cannot be responsible for patent infringements or other violations that may occur with the use of this product.
Note: The product listed herein is for research use only and is not intended for use in human or clinical diagnosis. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license. We cannot be responsible for patent infringements or other violations that may occur with the use of this product.
暂无相关常见问题。如有疑问,请联系我们的技术支持团队。
请等待最新文献信息更新。
我们的技术团队为您提供全方位的产品支持服务
根据您的研究目标,提供个性化的实验设计方案
经验丰富的技术专家协助您解决实验中遇到的问题
7x24小时在线技术支持,随时为您答疑解惑
提供免费样品试用,让您先试后买更放心